Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Straight 3.00" High Pressure MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Straight 5.50" MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Elbow 4.00" 45 Degree MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Transition 2.75" to 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 2.75" to 3" ID Transition 3.86 long MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Straight 3.00" High Pressure 5 ply silicone coupler with high pressure rings. Good to 100psi 3" ID 3.86 long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Straight 5.50" 5 Layer Fiberglass reinforced silicone so it will never suck closed under vacuum. This is the highest quality silicone coupler you can buy. 5.50" diameter straight, 4.00" long This silicone was designed to attach intake pipe to S400 Race... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Elbow 4.00" 45 Degree 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Elbow 3.00" 60 Degree Short Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 1.25" leg on one side 1.5" leg on the other side. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Elbow 3.00" 60 Degree Extra Ply 5 Layer fiberglass reinforced silicone will not collapse under vacuum. This is the highest quality silicone coupler you can buy. One 1.5" leg, one 2.5" leg This is perfect for 3" inlets on compressor housings to attach to your 3" intake tube. MSRP: Now: $35.00 Add to Cart Compare Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Elbow Transition 2.00" - 2.50" 90 Degree 4 Layer fiberglass reinforced silicone. This is the highest quality silicone coupler you can buy. 2" side has a 1.5" leg, 2.5" side has a 2.5" leg. This is a perfect coupler to connect the compressor outlet of turbos that are 2" and transition to... MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected × OK
Quick view AGP Silicone Transition 3.00" - 4.00" Extra Ply 5 Layer Fiberglass reinforced silicone so it will not collapse under vacuum. This is the highest quality silicone coupler you can buy. 3.00" to 4.00" transition 3.00" long MSRP: Now: $30.00 Add to Cart Compare Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected
Quick view AGP Silicone Elbow 3.00" 90 Degree Extra Ply 5 Layer fiberglass reinforced silicone so it will never collapse under vacuum. This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits MSRP: Now: $35.00 Add to Cart Compare Compare Selected