4" Dry Filter Intake for 2nd Gen Swap Kit

This is the intake from our 2nd Gen Swap Kits.  Aluminum tube, multi ply reinforced silicone coupler, S&B Intakes 4"x9" filter DRY element

4" Intake for 2nd Gen Swap Kit

This is the intake from our 2nd Gen Swap Kits.  Aluminum tube, multi ply reinforced silicone coupler, S&B Intakes 4"x9" filter.  This is designed for a low mount setup

5" Dry Filter Intake for 2nd Gen Swap Kit

This is the intake from our 2nd Gen Swap Kits.  Aluminum tube, multi ply reinforced silicone coupler, S&B Intakes 5"x9" filter Dry Element.  This is designed for low mount setup

5" Intake for 2nd Gen Swap Kit

This is the intake from our 2nd Gen Swap Kits.  Aluminum tube, multi ply reinforced silicone coupler, S&B Intakes 5"x9" filter.  This is designed for a low mount setup.

5.2" 04.5 Ram 2500/3500 Cummins Turbo-Side Downpipe Flange

Always wondered where you could get a flange to mate up with the factory downpipe location?  This flange is the turbo-side, also known as the cast elbow side flange for the downpipe section.  It measures 5.2" outside diameter, and is designed...

5.9 / 6.7 Cummins Head to Manifold Stud Kit 304 Stainless

304 Stainless exhaust stud and nut kit.  Use this kit when installing an aftermarket manifold on your 5.9 or 6.7 Cummins engine.  

AC Re-Route Kit for 2nd Gen Swap

Fleece Performance's A/C line re-route kit is a crucial component when performing a compound upgrade or 2nd Gen Swap in 13-18 2500/3500 Ram 6.7 Diesel trucks.  The factory A/C lines are in the way, this kit allows for all the room you need to get...

ATS Diesel 1998.5-2002 Dodge 5.9L 24V 3pc Big Foot T4 Pulse Flow Exhaust Manifold - 2049432218

ATS Diesel 1998.5-2002 Dodge 5.9L 24V 3pc Big Foot T4 Pulse Flow Exhaust ManifoldThis Part Fits:   YearMakeModelSubmodel 1998-2002 Dodge Ram 2500 Base 1998-2002 Dodge Ram 3500 Base

ATS Diesel 98.5-02 Dodge 24V 3pc Pulse Flow Manifold - 2049302218

ATS Diesel 98.5-02 Dodge 24V 3pc Pulse Flow ManifoldThis Part Fits:   YearMakeModelSubmodel 1998-2002 Dodge Ram 2500 Base 1998-2002 Dodge Ram 3500 Base

ATS Diesel 98.5-07 Dodge 5.9L 24V Cummins T4 Single Piece Pulse Flow Exhaust Manifold Kit - 2049412218

ATS Diesel 98.5-07 Dodge 5.9L 24V Cummins T4 Single Piece Pulse Flow Exhaust Manifold Kit

Midpipe for 2nd Gen Swap Kit

304 4.00" Stainless steel midpipe from our 2nd Gen Swap Kit.  This all stainless tig welded midpipe, joins the HX40 turbo outlet to the factory downipe location on 04.5-18, formerly taken up by the cast exhaust elbow.  This will allow you to...

Oil Drain Line for 2nd Gen Swap Kit

Braided stainless -10 AN oil drain line.  This will fit S300 and S400 turbos running a 2nd Gen Style manifold in low mount setup.

Oil Feed Line for S300 2nd Gen Swap Kit

Stainless braided -4 feed line for 2nd Gen Swap Kit for S300 turbos.  Includes fitting for the oil filter housing, and fitting for the turbo. Inlet fitting is 1/4" NPT found on S300.

Oil Feed Line for S400 2nd Gen Swap Kit

Stainless braided -6 feed line for 2nd Gen Swap Kit for S400 turbos.  Includes fitting for the oil filter housing, and fitting for the turbo. Inlet fitting is 1/4" NPT found on S400.

S&B 4" Dry Filter for 2nd Gen Swap R1178D

4" Replacement Dry Element filter for AGP intake for 2nd Gen Swaps Universal Filter (Dry Disposable Media): FlangeID 4, Top OD 5.25, Element Height 9, Top Style:Black Rim w/ Power Stack

S&B 4" Filter for 2nd Gen Swap R1178

4" Replacement filter for AGP intake for 2nd Gen Swaps   Universal Filter (Cleanable, 8-ply Cotton, BlueOil): Flange ID 4, Top OD 5.25, Element Height9, Top Style: Black Rim w/ Power Stack

S&B 5" Dry Filter for 2nd Gen Swap R1302D

5" Replacement Dry element filter for AGP intake for 2nd Gen Swaps   Universal Filter(Dry Disposable Media): 5.0“Flange ID, 5.5” Top OD, 8.0“ Base OD, 9.0”Element Height, Top Style: Power Stack w/Black Rim

S&B 5" Filter for 2nd Gen Swap R1302

5" Replacement filter for AGP intake for 2nd Gen Swaps   Universal Filter (Cleanable, 8-ply Cotton, BlueOil): 5.0“ Flange ID, 5.5” Top OD, 8.0“ Base OD,9.0” Element Height, Top Style: Power Stack w/Black Rim

S400 Charge Pipe for 2nd Gen Swap Kits 2003-2009

Charge pipe made from 304 Stainless Steel with beaded end in 3".  This charge tube clamps directly to the S400 outlet and is sealed by included o ring.  Pipe is designed to be used with standard low mount 2nd gen swap, NOT flipped high mount...

S400 Charge Pipe for 2nd Gen Swap Kits 2010-2012

Charge pipe made from 304 Stainless Steel with beaded end in 3".  This charge tube clamps directly to the S400 outlet and is sealed by included o ring.  Pipe is designed to be used with standard low mount 2nd gen swap, NOT flipped high mount...

S400 Charge Pipe for 2nd Gen Swap Kits 2013-2018

Charge pipe made from 304 Stainless Steel with beaded end in 3".  This hot side (pre intercooler) setup uses a cast aluminum elbow that clamps directly to the S400 outlet and is sealed by included o ring.  This cast elbow was designed to clear...

S464 83 Turbine Wheel T4 .90 A/R Housing HX40 Outlet 169012 Z463

AGP Brand S464, S463, S463.5, Z463. High Speed VSR Balanced, 360 Degree Thrust System Turbo has 83/74 turbine wheel directly interchangeable with Borg Warner S463 / S464 169012  70lbs / min approx 700 horsepower Compressor Specs: - S400 Platform...

Silicone Elbow 4.00" 45 Degree

5 Layer fiberglass reinforced silicone so it will never collapse under vacuum.  This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 4" intakes for Cummins 2nd Gen Swap Kits.

Silicone Elbow 5.00" 45 Degree

5 Layer fiberglass reinforced silicone so it will never collapse under vacuum.  This is the highest quality silicone coupler you can buy. 2.5" legs Note: This is the same coupler we supply in our 5" intakes for Cummins 2nd Gen Swap Kits.