AEM Bosch LSU 4.2 Replacement O2 Sensor

AEM's Bosch 4.2LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM wideband air/fuel UEGO controllers. These...

AEM Bosch LSU 4.9 Replacement O2 Sensor

AEM's Bosch 4.9LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM Digital Wideband UEGO Air/Fuel Controller...

AEM Classic Digital Wideband UEGO AFR Gauge

AEM’s legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED “needle” that...

AEM Digital Boost Gauge 35psi 30-4406

AEM’s digital Boost display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an...

AEM Digital Boost Gauge 50psi

AEM’s digital Boost display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an...

AEM Tru-BoostX Gauge-Type Boost Controller

(NOTE: The original 30-4350 Tru Boost Controller Gauge is discontinued and has been replaced with the 30-0352 X-Series Tru-BoostX Controller Gauge, below) The Tru-BoostX Boost Controller Gauge delivers all of the features you loved about the original...

AEM X-Series Inline Wideband UEGO AFR Controller

AEM’s X-Series Inline Wideband UEGO Air/Fuel Ratio Controllers are built upon unique, patented, 100% digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing*. The X-Series Wideband UEGO...

AEM X-Series OBDII Wideband AFR Controller Gauge 30-0334

AEM's X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0334) provides tuners who are using piggyback tuning modules or open source software with the ability to view AFR through the factory CAN-bus stream that is output by the factory ECU,...

AEM X-Series Wideband UEGO AFR Sensor Controller Guage 30-0300

The X-Series Wideband UEGO AFR Sensor Controller Gauge (PN 30-0300) measures 2 1/16th-inch (52mm) in diameter and features a modern, visually striking faceplate and new seven-segment center display that is 87% larger than the 30-4110 AEM Wideband...

Aeromotive EFI Regulator 13129

This Aeromotive -6 EFI Bypass Regulator encompasses features and benefits only found on Aeromotive regulators and in a new smaller and lighter package. Capable of supporting applications up to 1000 HP, the 13129 EFI Bypass Regulator can handle high-flow...

DiabloSport inTune i3 Programmer With 3 bar MAP and TIP Sensors

This inTune comes blank with your ability to have your favorite tuner make a custom tune for your setup.  This setup comes with plug and play factory 3bar MAP and 3bar TIP sensors.

DiabloSport inTune i3 Programmer with Custom Tune for SRT-4 Neon

This is the DiabloSport inTune i3 with our custom tunes. We highly recommend a good wideband (AEM UEGO) when running this as it will help us greatly in getting you the tune you are hoping for. You must have 3 bar MAP and TIP sensors for this flash to...

Diablosport inTune Platinum i3 Chrysler 8345

DiabloSport's 3rd generation InTune i3 performance programmer builds on the existing features of the highly successful, industry leading InTune i2. DiabloSport makes it even easier to upgrade vehicle performance by simply altering the factory tune with a...

Fuel Pressure Regulator Gauge 100psi

1/8" NPT Fuel Pressure Regulator Gauge.  This is the gauge we supply in our fuel pressure return kits.

Go Fast Bits G-Force III Electronic Boost Controller

Are you looking for a good electronic boost controller with all the necessary options that you want, but not too complicated that you get frustrated?  Go Fast Bits has the answer that we've all been looking for.  We use this boost controller in...

SRT-4 1000/1150cc PNP Injectors Gen2

AUS has developed a new injector for this platform that works well at lower fuel pressures to aid the random stumble that occurs at part throttle.  These Gen 2 injectors for the SRT-4 platform are a step up from the dead reliable 925cc injectors...

SRT-4 1200cc/1400cc PNP Injectors

AUS has developed a new injector for this platform that works well at lower fuel pressures to aid the random stumble that occurs at part throttle.  These Gen 2 injectors for the SRT-4 platform are a step up from the dead reliable 925cc and 1200cc...

SRT-4 AGP Fuel Rail Spacers

This pair of fuel rail spacers is used to properly space the factory fuel rail when installing aftermarket injectors like the RC Engineering or Fuel Injector Clinic injectors.

SRT-4 Neon 3 bar MAP Sensor Adapter (No Sensor)

Use your Caliber MAP sensor and screw this in to your Neon.  No changing of wires needed, bolt on and go.  This is the adapter only and does not include the sensor.

SRT-4 Neon AGP Billet Pawn (Injector Cover Mount)

These CNC billet aluminum pawns replace the factory pieces when you upgrade your injectors to the 550, 650, and 750cc injectors from RC, FIC, and of course AGP. Because of the physically longer injector, the fuel rail gets spaced out by a half and inch,...

SRT-4 Neon AGP Custom Tune for Diablosport

This is our Tuning Package for those that already have the Diablosport Predator Trinity or InTune handheld. We highly recommend a good wideband and a datalogging tool when running this as it will help us greatly in getting you the tune you are...

SRT-4 Neon AGP Fuel Line Adapter

This is the same adapter we use in our Fuel Return Kits. This billet aluminum adapter allows you to tap in to your existing factory fuel hard lines. It is a quick disconnect on one end, and a -6ORB female on the other end. This piece comes with two...

SRT-4 Neon AGP Fuel Return Line Kit

Introducing the only aftermarket fuel return setup that regulates the fuel pressure BEFORE the fuel rail. What does this mean? Now it doesn't matter if you have a fuel rail with a schrader valve, nor do you need a custom fuel rail. Every stock fuel rail...

SRT-4 Neon AGP Fuel Return Line Kit Replacement Parts

We have been selling this fuel return kit since the Neon SRT-4 was released, so chances are you might have one that needs some fresh parts.  Here is our complete parts diagram breakdown and you can order each part separately if needed.   A. -6...