4.21" S400 GT42 GT45 GT47 Aluminum Compressor V Band Outlet Flange to 3" or 3.5" Tube

Adapt the V-Band compressor outlet of your GT42/45/47 and S400 based turbos to a 3" or 3.5" weld flange. Kit includes CNC aluminum V-Band flange for you to weld a 3" or 3.5" tube, and sealing o ring.  If you use the inside of the flange, you can...

Garrett GT 3" Turbine Outlet Flange

3/8" thick. Turbine outlet flange for the Garrett GT Ball Bearing turbocharger 3" outlet. GT30R, GT35R This is not the same flange as the T31. Bolt spacing is different.

Garrett T31 Turbine Outlet Flange

3/8" thick. Turbine outlet flange for the T31 Garrett Ballistic Concepts 4 bolt outlet turbocharger. TA34

HE300VG Turbo To Manifold Gasket 5339363 2019-2024 6.7 Cummins Inconel

5th Gen Ram 2500/3500 turbine inlet gasket, dual layer 718 Inconel.  Replacement for Cummins 5339363 

HKS SSQ Recirculation Tube

Have you always wanted to recirculate your HKS SSQ Blow off Valve? Here is an adapter tube that attaches to the end of the HKS Super Sequential that allows the vented air to be re-routed back into the intake. The tube is made from billet 6061 aluminum...

HKS SSQ SQV BOV Flange Aluminum

Aluminum blow off valve mounting flange for the HKS Super Sequential BOV radiused for 2.5" tubing.

Oil Feed Flange Kit for T3/T4 2 Bolt Oil Inlet

So you just bought this turbo from your "buddy" and you just can't figure out what the threads are.  You've gone to the auto parts stores, home improvement stores, and you just can't get the correct one.  Save the hassle and just buy this kit...

SRT-4 Neon 3" Downpipe Flange

This is the mild steel non-threaded downpipe flange to connect a 3" exhaust system to your factory O2 housing, or make a 3" O2 housing.

SRT-4 Neon 3" Downpipe Gasket

This is the downpipe to O2 housing gasket for our Big Turbo Kits. This gasket is embossed stainless steel for OEM fit and finish.

T3 Divided Turbine Inlet Flange

Mild Steel Divided T3 Turbine Inlet flange with tapped M10x1.5 holes.   1/2" Thick

T3 Turbine Inlet Flange

Mild Steel T3 Turbine Inlet flange with tapped M10x1.5 holes 1/2" Thick

T3 Turbine Inlet Flange CNC Billet 304 Stainless

Billet CNC Machined T3 Turbine Inlet Flange with M10x1.5 Tapped Holes.  These are fully machined. 1/2" Thick

T4 Divided Turbine Inlet Flange

Mild Steel Divided T4 Turbine Inlet Flange with Tapped Holes M10x1.5 1/2" Thick

T4 Turbine Inlet Flange

Mild Steel T4 Turbine Inlet Flange with Drilled Holes 1/2" Thick

T4 Turbine Inlet Flange CNC Billet 304 Stainless

Billet CNC Machined T4 Turbine Inlet Flange with M10x1.5 Tapped Holes.  These are fully machined. 1/2" Thick

TiAL Q 50mm Aluminum BOV Flange

Tial 50mm / TiAL Q BOV FlangeAluminum flange with mounting radius for 2.5" tube

Wastegate Outlet Flange for AGP 46mm

Outlet flange for AGP-46 Wastegate.  Flange is stainless steel and is designed for a 1.75" dump tube to be attached.