4.21" S400 GT42 GT45 GT47 Stainless Compressor V Band Outlet Flange to 3" or 3.5" Tube

Adapt the V-Band compressor outlet of your GT42/45/47 and S400 based turbos to a 3" or 3.5" 304 Stainless Steel weld flange. Kit includes CNC 304 SS V-Band flange for you to weld a 3" or 3.5" tube, and sealing o ring.  If you use the inside of the...

4.21" S400 GT42 GT45 GT47 Aluminum Compressor V Band Outlet Flange to 3" or 3.5" Tube

Adapt the V-Band compressor outlet of your GT42/45/47 and S400 based turbos to a 3" or 3.5" weld flange. Kit includes CNC aluminum V-Band flange for you to weld a 3" or 3.5" tube, and sealing o ring.  If you use the inside of the flange, you can...

4.21" S400 GT42 GT45 GT47 Stainless Compressor V Band Outlet Kit to 3" or 3.5" Tube

Adapt the V-Band compressor outlet of your GT42/45/47 and S400 based turbos to a 3" or 3.5" 304 Stainless Steel weld flange adapter with one of our kits. Kit includes V-Band clamp and CNC 304 SS V-Band for you to weld a 3" or 3.5" tube, and sealing...

4.21" S400 GT42 GT45 GT47 Aluminum Compressor V Band Outlet Kit to 3" or 3.5" Tube

Adapt the V-Band compressor outlet of your GT42/45/47 and S400 based turbos to a 3" or 3.5" weld flange adapter with one of our kits. Kit includes V-Band clamp and CNC aluminum V-Band for you to weld a 3" or 3.5" tube, and sealing o ring.  If...

Oil Drain Flange S400 / S300 w/ O Ring Seal to .750 Hose Barb

Billet 6061 oil drain flange for Borg Warner S400 and S300 turbos with an O Ring seal so there is no need for a drain gasket. Male 3/4" .750 Hose Barb  

Oil Drain Flange for T3 T4 S200 S300 w/ O Ring Seal

Billet 6061aluminum Oil drain flange tapped for 1/2" NPT fitting with an o ring seal so there is no need for a gasket.  These fit all standard T3 and T4 oil drain from Garrett, Precision, Turbonetics and Borg Warner S200 and S300 series...

Oil Drain Flange S400 / S300 w/ O Ring Seal to -10 AN

Billet 6061 oil drain flange for Borg Warner S400 and S300 turbos with an O Ring seal so there is no need for a drain gasket. Male -10 AN  

Oil Drain Flange S400 / S300 w/ O Ring Seal to -12 AN

Billet 6061 oil drain flange for Borg Warner S400 and S300 turbos with an O Ring seal so there is no need for a drain gasket. Male -12 AN  

Garrett GT 3.00" Turbine Outlet Gasket

Turbine outlet embossed stainless steel gasket for the Garrett GT Ball Bearing turbocharger 3" outlet. GT30R, GT35R This is not the same gasket as the T31, Bolt spacing is different.

OIl Drain Gasket S400

Oil Drain Gasket for S400 and GT42-45-47 framed turbos

Oil Drain Hose Fitting for T3 T4 S200 S300

This is the fitting that screws into the T3 T4 S200 S300 Drain Flange to allow you to adapt to 3/4" ID Hose for the oil drain. 1/2" NPT to 3/4" Hose

Oil Drain Hose Fitting for S400

This is the fitting that screws into the S400 Drain Flange to allow you to adapt to 3/4" ID Hose for the oil drain. 3/4NPT to 3/4" Hose

Oil Drain Flange for GT25 GT28 GT30 and GT35 Ball Bearing

Garrett GT25, GT28, GT30, and GT35 Ball Bearing Turbocharger Billet Aluminum Drain Flange with 1/2" NPT threads.

T4 Divided Turbine Inlet Flange

Mild Steel Divided T4 Turbine Inlet Flange with Tapped Holes M10x1.5 1/2" Thick

T4 Turbine Inlet Flange

Mild Steel T4 Turbine Inlet Flange with Drilled Holes 1/2" Thick

T3 Divided Turbine Inlet Flange

Mild Steel Divided T3 Turbine Inlet flange with tapped M10x1.5 holes.   1/2" Thick

T3 Turbine Inlet Flange

Mild Steel T3 Turbine Inlet flange with tapped M10x1.5 holes 1/2" Thick

Oil Drain Flange S400 with O Ring Seal

Billet 6061 oil drain flange for Borg Warner S400.  Center hole is tapped 3/4" NPT Updated with an O Ring seal so there is no need for a drain gasket  

T5 / T6 Turbine Inlet Gasket Divided

Turbine Inlet Gasket for T5 and T6 based turbos like GT42, GT45, GT47, and Borg Warner S400sx4 turbine housings.  This gasket is divided design.  THIS IS NOT A T4 GASKET

T5 / T6 Turbine Inlet Gasket

Turbine Inlet Gasket for T5 and T6 based turbos like GT42, GT45, GT47, and Borg Warner S400sx4 turbine housings.  This gasket is open design.  THIS IS NOT A T4 GASKET

38mm Wastegate Flange Threaded Hole

1/2" Thick Billet 304 Stainless Steel Flanges.  This flange has threaded M8x1.25 holes commonly used on the inlet side of the wastegate when making manifolds. AGP Turbo 38 / Tial F35 / Tial F38 / Turbonetics Evolution / Deltagate / TurboSmart...

Oil Feed Flange Kit for T3/T4 2 Bolt Oil Inlet

So you just bought this turbo from your "buddy" and you just can't figure out what the threads are.  You've gone to the auto parts stores, home improvement stores, and you just can't get the correct one.  Save the hassle and just buy this kit...

Wastegate Outlet Flange for AGP 46mm

Outlet flange for AGP-46 Wastegate.  Flange is stainless steel and is designed for a 1.75" dump tube to be attached.

T4 Turbine Inlet Gasket Divided

Turbine Inlet Gasket for Divided T4 Turbo