AGP Boost Leak Tester

Use this aluminum boost leak tester tube to check your system for leaks.  The tube is 3" and has the necessary bead formed on the end so it will not blow off during tests.  The other end has a 1/4" NPT bung for you to attach all of your...

AGP Turbo 3" Air Filter

AGP Turbo washable and reusable cone air filter. This is the same filter we use in our intake kits. 3" inlet - 6.75" long

AGP Turbo 4" Air Filter

AGP Turbo washable and reusable cone air filter. This is the same filter we use in our intake kits. 4" inlet - 6.75" long

AGP Turbo 4" Shorty Air Filter RU-2510

K&N washable and reusable cone air filter. This is the same material as all our other filters, however it's extra short to help fit in tight spaces. For those wanting to run a filter right on the turbo, this is your best solution for tight spaces.4"...

Silicone Elbow 3.00" 90 Degree

4 Layer fiberglass reinforced silicone.  This is the highest quality silicone coupler you can buy. 2" leg by 3" leg

Silicone Elbow 3.00" 90 Degree Extra Ply

5 Layer fiberglass reinforced silicone so it will never collapse under vacuum.  This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our Neon SRT-4 Cold Air Intake Kits

Silicone Elbow 4.00" 90 Degree

5 Layer fiberglass reinforced silicone so it will never collapse under vacuum.  This is the highest quality silicone coupler you can buy. 2" leg by 3" leg Note: This is the same coupler we supply in our 4" intake kits.

Silicone Elbow Transition 4.00" - 3.00" 90 Degree Extra Ply

5 Layer fiberglass reinforced silicone so it will never collapse under vacuum.  This is the highest quality silicone coupler you can buy. 4" section has a 2" leg , 3" section has a 3" leg Note: This is the same coupler we supply in our Neon...

SRT-4 Neon AGP 3 inch Cold Air Intake System

Upgrade your SRT-4 with the first and only true 3 inch intake system. The intake begins in the fender well and extends all the way to the turbo's compressor inlet. All silicone connectors, hose clamps, and necessary hardware are included. This piece...

SRT-4 Neon AGP 4 inch Short Ram Intake

The long awaited 4" intake for the Neon SRT-4 is here.  This includes the silicone coupler to mount to your 4" inlet turbo and places the filter behind the headlight.  Simple install and includes the nipple to connect your valve cover vent hose...

SRT-4 Neon Hot Parts Turbo Kit

Hot parts or "Hard Parts" kit for the Neon SRT-4 Big Turbo.  Source your turbo from your buddy and your wastegate from eBay, make some oil lines in your living room, and whalla!; you now have a big turbo kit.  This is our manifold, o2 housing,...