Product Description
You’ve spent the last year gathering up all of your supporting mods and you want to go Big Turbo, but you’re on a budget. We completely understand that, and have chosen the two best bang-for-your-buck AGP CW turbos available for your Neon SRT4.
This is an AGP Big Turbo Kit, but stripped down to the components you absolutely need to run it. There is NO overflow bottle, NO blanket, but still has all the clamps, fittings, locking tabs, etc. that you need.
*Note this kit is journal bearing only.
CW 5157B - This turbo is rated at 47lbs/min and will make just shy of 450whp maxed out at 29psi in the .48 A/R turbine housing. Expect full boost around 3000rpm and most people see 340-360whp at 20psi when properly tuned with the correct supporting mods. Compressor housing is 3" inlet
CW 5657E - The 56mm Extended Tip'd "S256RS" based compressor wheel is rated at 55lbs/min and will make around 510whp at 30psi in the .63 A/R turbine housing. Full boost can be seen around 3500rpm in the .63 A/R turbine housing. These turbos likely see 360-380whp at 20psi when properly tuned with the correct supporting mods. Compressor housing is 4" inlet.
For all the extra sound, we offer the T51R Mod as an option:
- Optional T51R Mod is where we plug and then CNC machine the inlet of the compressor housing to amplify the turbo whine and whistle. Keep in mind this modification is done after the order is placed and typically ads a week or two before the order is shipped. However, sometimes it can take longer and maybe even up to 4 weeks. If you have ordered other finishing options like ceramic or polishing, it may add additional time on top of the typical 2-3 weeks before your order ships. Because of the labor intensive work and machine time needed, there can be delays beyond what we quote. We do take special care to every order to prepare for shipping and want to make sure you get the highest quality parts and service. We are confident that the quality you receive is worth the wait. We appreciate your patience while we work.
- For more information about the T51R mod, please read this article.
Modifications Needed to run this AGP kit:
-3" intake
-External Blow Off Valve Setup
-Fuel Upgrades
-3" exhaust
Kit Includes: AGP T3 manifold, Tial 38mm wastegate with 14psi spring or Precision 39mm wastegate, stainless steel dump tube, turbo of your choice, 3" cast stainless steel O2 housing, oil feed and drain lines, water line plugs, gaskets, clamps, vacuum line, nuts and bolts.
While we stock all the components in the kit, please allow about a week to gather all the components and ship after your order is placed.
