A Big Wheel Stocker from AGP? No way!
Technically this is not from AGP as we have always bashed the BWS and its inability to truly compete with our big turbo kit. There was a local shop to us that closed its doors recently that sourced these turbos, and before they left town they sold their remaining stock of these turbos to us. We have a handful of these and wanted to pass the savings down to those of you that want a little bit of an upgrade. We say "little bit of an upgrade" because it really is. After selling out of our few offerings, we were able to source another batch of these.
Unbolt your stock turbo, keep the turbine spacer ring, transfer your wastegate and surge valve over to this one, and reinstall.
Stock Turbo compressor wheel specs:
Inducer - 43.4mm
Exducer - 56.1mm
Big Wheel Stock compressor wheel specs:
Inducer - 48.3mm
Exducer - 68mm
All parts are brand new OEM spec and the rotating assembly is VSR high speed balanced. If we didn't think these were well made, we wouldn't sell them. We highly recommend not exceeding 18psi of boost on these turbos, or any TD04 based turbo, as high shaft speeds will shorten the life of the turbo. This turbo can make a solid 300whp at around 18psi.
Included is a CHRA with compressor housing and an oil drain gasket. You will need to reuse your factory wastegate actuator (or AGP WGA) and your factory surge valve (or AGP BOP), and your turbine spacer ring. Not installing the spacer ring will result in turbine wheel damage.
90 Day Warranty against manufacturing defects.