Product Description
AGP's 51mm Extended Tip compressor wheel from the new Cast Wheel Z200 line with AGP's turbine housings. AGP has taken the proven S200 frame and made some improvements like Ported Cover, VSR balancing, optional 360 degree thrust bearing, and compressor o ring sealed for leak-free boost.
Compressor Specs:
- 51mm extended tip compressor wheel 47lbs/min
- AGP Port Shroud compressor housing with 4" inlet and 2" outlet
Turbine Specs:
- Borg Warner 2.74/2.42 turbine wheel, 70/61mm
The bearing housings are not water-cooled and have a 1/4"NPT oil inlet. This turbo does not use an oil feed flange. The oil drain is the standard T3-T4 with M8 threads. Lines and fittings are all available here. Flanges and gaskets are available here.
Options: If you want some added flavor to your turbo, we can polish the compressor housing and/or ceramic coat the turbine housing black or silver. We can also weld elbows off the compressor outlet to fit your installation perfectly.
Optional T51R Mod is where we plug and then CNC machine the inlet of the compressor housing to amplify the turbo whine and whistle. Keep in mind this modification is done after the order is placed and typically ads a week or two before the order is shipped. However, sometimes it can take longer and maybe even up to 4 weeks. If you have ordered other finishing options like ceramic or polishing, it may add additional time on top of the typical 2-3 weeks before your order ships. Because of the labor intensive work and machine time needed, there can be delays beyond what we quote. We do take special care to every order to prepare for shipping and want to make sure you get the highest quality parts and service. We are confident that the quality you receive is worth the wait. We appreciate your patience while we work.
