5" Dry Filter Intake for 2nd Gen Swap Kit

This is the intake from our 2nd Gen Swap Kits.  Aluminum tube, multi ply reinforced silicone coupler, S&B Intakes 5"x9" filter Dry Element.  This is designed for low mount setup

5" Intake for 2nd Gen Swap Kit

This is the intake from our 2nd Gen Swap Kits.  Aluminum tube, multi ply reinforced silicone coupler, S&B Intakes 5"x9" filter.  This is designed for a low mount setup.

5.16" V-Band Turbine Outlet Flange for Garrett GT47 GT55 G55 G57 and Borg Warner S500 to 5" Tube

This is the V-Band turbine outlet flange for Garrett GT47 and GT55 turbos along with the Borg Warner S500 and S500SX-E with a Half Marmon 5.16 OD flat flange.  Billet 304 stainless steel weld...

5.16" V-Band Turbine Outlet Kit for Garrett GT47 GT55 G55 G57 and Borg Warner S500 to 5" Tube

This is the V-Band turbine outlet kit for Garrett GT47 and GT55 G55 G57 turbos along with the Borg Warner S500 and S500SX-E with a Half Marmon 5.16 OD flat flange.  Includes V-Band clamp and...

5.2" 04.5 Ram 2500/3500 Cummins Turbo-Side Downpipe Flange

Always wondered where you could get a flange to mate up with the factory downpipe location?  This flange is the turbo-side, also known as the cast elbow side flange for the downpipe section...

5.75" Marmon V-Band Outlet Clamp for Garrett T6 GT42 and Borg Warner T6 S400sx4

This is the V-Band clamp for the turbine outlet of the T6 TV91 inlet flanged GT42 and S400sx4.  This is the clamp for the Full Marmon 5.75 OD tapered flange.  This V-Band...

5.75" Marmon V-Band Turbine Outlet Flange for Garrett T6 GT42 and Borg Warner T6 S400sx4 to 4" Tube

Adapt the turbine outlet of your 5.75" Outside Diameter 3/4 Marmon V-Band outlet turbos.  This V-Band flange will work with most Garrett GT42 GT45 and Borg Warner S400sx4 V-Band...

5.75" Marmon V-Band Turbine Outlet Flange for Garrett T6 GT42 and Borg Warner T6 S400sx4 to 5" Tube

Adapt the turbine outlet of your 5.75" Outside Diameter3/4 Marmon V-Band outlet turbos.  This V-Band flange will work with most Garrett GT42 GT45 and Borg Warner S400sx4 V-Band...

5.75" Marmon V-Band Turbine Outlet Kit for Garrett T6 GT42 and Borg Warner T6 S400sx4 to 4" Tube

Adapt the turbine outlet of your GT45 or S400sx4 based turbo to a 4" tube.  This fits the 3/4 marmon 5.75 OD tapered flange.  This V-Band kit is for the turbine outlet of T6...

5.75" Marmon V-Band Turbine Outlet Kit for Garrett T6 GT42 and Borg Warner T6 S400sx4 to 5" Tube

Adapt the turbine outlet of your GT45 or S400sx4 based turbo to a 5" tube.  This fits the 3/4 marmon 5.75 OD tapered flange.  This V-Band kit is for the turbine outlet of T6...

5.9 / 6.7 Cummins Head to Manifold Stud Kit 304 Stainless

304 Stainless exhaust stud and nut kit.  Use this kit when installing an aftermarket manifold on your 5.9 or 6.7 Cummins engine.  

6.7 Holset HE351VE and HE300VG Reman Turbo

Do you have a code for actuator malfunction on your 2007.5-2018 Ram Cummins 6.7?  Chances are you're right around 100k miles and it's time for a fix.  The dealer will likely try and sell...