Product Description
You’ve spent the last year gathering up all of your supporting mods and you want to go Big Turbo, but you’re on a budget. We completely understand that, and have chosen the two best bang-for-your-buck Borg Warner turbos available for your Neon SRT4.
This is an AGP Big Turbo Kit, but stripped down to the components you absolutely need to run it. There is NO overflow bottle, NO blanket, but still has all the clamps, fittings, locking tabs, etc. that you need.
*Note that All Borg Warner Turbos listed are Journal Bearing only.
S251sx - This turbo is rated at 47lbs/min and will make just shy of 450whp maxed out at 29psi in the .48 A/R turbine housing. Expect full boost around 3000rpm and most people see 340-360whp at 20psi when properly tuned with the correct supporting mods.
S256sx - The 56mm Extended Tip'd S200sx turbo is rated at 55lbs/min and will make around 510whp at 30psi in the .63 A/R turbine housing. Full boost can be seen around 3500rpm in the .63 A/R turbine housing. These turbos likely see 360-380whp at 20psi when properly tuned with the correct supporting mods.
Modifications Needed to run this AGP kit:
-3" intake
-External Blow Off Valve Setup
-Fuel Upgrades
-3" exhaust
Kit Includes: AGP T3 manifold, Tial 38mm wastegate with 14psi spring or Precision 39mm wastegate, stainless steel dump tube, turbo of your choice, 3" cast stainless steel O2 housing, oil feed and drain lines, water line plugs, gaskets, clamps, vacuum line, nuts and bolts.
While we stock all the components in the kit, please allow up to 3 weeks for your kit to be fabricated, assembled, packaged, and shipped.