AGP has the V Band on V Band turbine housing available for all your favorite AGP, Garrett, and Borg Warner (including EFR) turbochargers in .63, .82, and 1.06 A/R. This housing matches Borg Warner's F(v) and I type inlet pattern which also adapts to manifolds that were designed to use Garrett, TiAl, or Precision v band housings with a nifty centering ring that we can supply. The outlet is the industry standard 3" that has a flat 3.625 Outside Diameter. Housing is cast in Hi-Silicon-Moly ductile iron to resist corrosion and extreme temperatures.
Inlet Centering Ring is designed to be used when you already have a manifold made with either a Garrett flange, TiAl flange or a Precision flange. This centering ring fits inside our housing and allows the housing to perfectly match the Garrett, TiAl, or Precision flange. Please select below. If your manifold is constructed with the Borg Warner EFR flange or the AGP Flange, you do not need an Inlet Centering Ring. Inlet Centering Rings are for inlet flanges that measure approximately 3.00"
The EFR housing options come with clamp plates and bolts
We offer an optional 304 Stainless Inlet Flange and Clamp with a 2.4" diameter bore for welding 2" Schedule Pipe
We offer an optional 304 Stainless Outlet Flange and Clamp with a 3.030" diameter bore for welding 3" Tube
We offer an optional 304 Stainless Outlet Flange and Clamp with for welding a 3.5" Tube on the inside, or 4" Tube on the outside
6 Reviews Hide Reviews Show Reviews
This housing is awesome! Was ordering a new turbo and wanted to go from a 58mm to a 62mm. Decided to try out a Borg Warner and this allowed me to bolt it right up to the Precision V-Band flange on my manifold. I've been recommending this to a few friends that are curious about trying different turbos without having to take their manifolds to a fab shop and pay to change the flange.
Excellent quality and just what we needed for the confined space on customer build.
Ordered this housing to replace my AGP T3 housing due to an uppipe change, inlet centering ring fit perfectly and the turbine housing fits perfectly! My turbo for this is a Borg Warner S363SXE with the 68mm turbine wheel for reference.
fitment and turbine machining very nice, but some hand finishing required to volute tongue clearance. due to 80mm turbine in a t3 sized housing.
housing volute appears to be optimized for a 76mm turbine inducer.
These housings meet and exceed our expectations.
also , Ben and his crew went above and beyond the call
of duty when I needed them to pull me out of a jam.
not only do they sell an superior product, they have the customer service to match it. Thanks again guy's
AGP’ has a great quality BW vband inlet housing. I was highly impressed with the casting quality and machined surface finish. I will be definitely looking at getting this product in the future again.