Product Description
This is a very popular turbo in the Pro Street classes of your sanctioning body. We've been supplying this combination to quite a few racers and this is a perfect option for your high boost street bike application where the rules state the inlet opening cannot be more than 62.5mm. We utilize Garrett Motion's GT Ball Bearing assembly, with AGP Turbo's proprietary wheels and housings. The turbo is available in .82 A/R only with a T3 flange or V Band flange inlet, and a V Band flange outlet.
Compressor Specs:
- AGP Cast T04S Compressor Housing with 4” Inlet and 2.5” Outlet
- AGP Billet 61.5mm inducer 84mm exducer 7075 aluminum compressor wheel 75lbs / min
Turbine Specs:
- AGP 62mm exducer Turbine Wheel
- T3 Open Scroll turbine housing inlet .82 A/R with 3.625 V Band Outlet
- V Band Open Scroll turbine housing inlet .82 A/R with 3.625 V Band Outlet
Turbo is water cooled, however most customers do not run water ports and is acceptable in a drag racing application. The oil feed the 7/16-24 Inverted Flare, and your oil drain is the standard GT Ball Bearing bolt spacing. If you decide to run water ports, the jackets are M14x1.5.
Options include polishing the compressor housing, and ceramic coating the turbine housing. Keep in mind, if you select these options, this will delay shipment usually by 3 weeks.
