3.625" V-Band Turbine Outlet Kit for Borg Warner EFR to 3" Tube

Adapt the turbine outlet for your EFR V-Band outlet turbos.  This V-Band kit will work with all EFR V Band Outlet housings with the 3.625" OD flat flange. The outlet flange is billet T304...

3.625" V-Band Turbine Outlet Kit for Borg Warner EFR to 3.5" or 4" Tube

Adapt the turbine outlet for your EFR V-Band outlet turbos.  This V-Band kit will work with all EFR V Band Outlet housings with the 3.625" OD flat flange. The outlet flange is billet T304...

38mm Wastegate Flange Threaded Hole

1/2" Thick Billet 304 Stainless Steel Flanges.  This flange has threaded M8x1.25 holes commonly used on the inlet side of the wastegate when making manifolds. AGP Turbo 38 / Tial F35 / Tial F38...

38mm Wastegate Flange Through Hole

1/2" Thick Billet 304 Stainless Steel Flanges.  This flange has through holes commonly used on the outlet side of the wastegate when making dump tubes. AGP Turbo 38 / Tial F35 / Tial F38 /...

38mm Wastegate Gasket

.027" Thick Stainless Steel Gasket stamped OE style. Get rid of those composite gaskets that blow out every few months, and upgrade to something that actually works.   AGP Turbo 38 / Tial35 /...

3rd Gen Cummins T3 Divided Inlet Non-Wastegated 4.4" HE341 HE351 Outlet 14cm for S300

You love the durability, availability, and affordability of the Borg Warner S300sx and sxe series of turbos, however those factory John Deere housings make them a little bit more difficult to install...

3rd Gen Cummins T3 Divided Inlet Wastegated 4.4" HE341 HE351 Outlet for S300

You love the durability, availability, and affordability of the Borg Warner S300sx and SXE series of turbos, however those factory John Deere housings make them a little bit more difficult to install...

3rd Gen Swap Kit T4 Complete

Swap out your stock turbo on your 2007.5-2018 2500/3500 truck to one of our 3rd Gen Swap Kits.  This kit centers around the Steed Speed 3rd Gen Divided T4 manifold (or ATS 3 Piece), and utilizes...

4" Aluminum U Bend

4" 6061 Aluminum OD .079" wall thickness 6" radius 10" legs

4" Dry Filter Intake for 2nd Gen Swap Kit

This is the intake from our 2nd Gen Swap Kits.  Aluminum tube, multi ply reinforced silicone coupler, S&B Intakes 4"x9" filter DRY element

4" Intake for 2nd Gen Swap Kit

This is the intake from our 2nd Gen Swap Kits.  Aluminum tube, multi ply reinforced silicone coupler, S&B Intakes 4"x9" filter.  This is designed for a low mount setup

4.0" HX40 V Band Turbine Outlet Flange to 4.0" or 3.5" Tube

Weld-on HX40 V-Band Turbine Outlet Flange.  Constructed of 304 Stainless Steel.  This flange allows you to weld a 3.5" tube to the inside diameter, and also would allow you to weld a 4"...