5.2" 04.5 Ram 2500/3500 Cummins Turbo-Side Downpipe Flange

Always wondered where you could get a flange to mate up with the factory downpipe location?  This flange is the turbo-side, also known as the cast elbow side flange for the downpipe section...

5.75" Marmon V-Band Outlet Clamp for Garrett T6 GT42 and Borg Warner T6 S400sx4

This is the V-Band clamp for the turbine outlet of the T6 TV91 inlet flanged GT42 and S400sx4.  This is the clamp for the Full Marmon 5.75 OD tapered flange.  This V-Band...

5.75" Marmon V-Band Turbine Outlet Flange for Garrett T6 GT42 and Borg Warner T6 S400sx4 to 4" Tube

Adapt the turbine outlet of your 5.75" Outside Diameter 3/4 Marmon V-Band outlet turbos.  This V-Band flange will work with most Garrett GT42 GT45 and Borg Warner S400sx4 V-Band...

5.75" Marmon V-Band Turbine Outlet Flange for Garrett T6 GT42 and Borg Warner T6 S400sx4 to 5" Tube

Adapt the turbine outlet of your 5.75" Outside Diameter3/4 Marmon V-Band outlet turbos.  This V-Band flange will work with most Garrett GT42 GT45 and Borg Warner S400sx4 V-Band...

5.75" Marmon V-Band Turbine Outlet Kit for Garrett T6 GT42 and Borg Warner T6 S400sx4 to 4" Tube

Adapt the turbine outlet of your GT45 or S400sx4 based turbo to a 4" tube.  This fits the 3/4 marmon 5.75 OD tapered flange.  This V-Band kit is for the turbine outlet of T6...

5.75" Marmon V-Band Turbine Outlet Kit for Garrett T6 GT42 and Borg Warner T6 S400sx4 to 5" Tube

Adapt the turbine outlet of your GT45 or S400sx4 based turbo to a 5" tube.  This fits the 3/4 marmon 5.75 OD tapered flange.  This V-Band kit is for the turbine outlet of T6...

5.9 / 6.7 Cummins Head to Manifold Stud Kit 304 Stainless

304 Stainless exhaust stud and nut kit.  Use this kit when installing an aftermarket manifold on your 5.9 or 6.7 Cummins engine.  

6.7 Ram Cummins Non VGT Turbine Housing for S300

This housing will allow you to bolt an S300 or S300SXE turbo to your 2007.5-2018 Dodge / Ram 6.7 Cummins.  We have machined the inlet to fit the T4i flange pattern and correctly positioned the...

6.7 Ram Cummins Turbine Housing and Wheel VGT Upgrade 64mm

If you're a DIY and rebuilding your 2007.5-2018 6.7 Cummins VGT turbo, throw in an upgrade turbine side.  Turbine wheel is AGP's 70/64mm 10 blade wheel, and housing is a brand new casting with...

6.7 Ram Cummins Turbine Housing and Wheel VGT Upgrade 67mm

If you're a DIY and rebuilding your 2007.5-2018 6.7 Cummins VGT turbo, throw in an upgrade turbine side.  Turbine wheel is AGP's 70/67mm 10 blade wheel, and housing is a brand new casting with...

7/16-24 IF AGP/Garrett Twin Ball Bearing to -4 Oil Feed Fitting Restrictor

This fitting screws into the bearing housing of AGP/Garrett T Series Twin Ball Bearing turbos. It has the properly sized oil restrictor built in. The threads are 7/16-24 Inverted FlareNOTE: THIS IS...

7/16-24 IF T2 / GTBB Ball Bearing to -4 Oil Feed Fitting

This fitting screws into the bearing housings of T2, GT25R, and GT30R/GT35R Ball Bearing turbochargers from Garrett. It has a -4 fitting on the other end to connect to your oil feed line. GT Ball...