SRT-4 Neon AGP Fuel Line Adapter

This is the same adapter we use in our Fuel Return Kits. This billet aluminum adapter allows you to tap in to your existing factory fuel hard lines. It is a quick disconnect on one end, and a -6ORB...

SRT-4 Neon AGP Fuel Return Line Kit

Introducing the only aftermarket fuel return setup that regulates the fuel pressure BEFORE the fuel rail. What does this mean? Now it doesn't matter if you have a fuel rail with a schrader valve, nor...

SRT-4 Neon AGP Fuel Return Line Kit Replacement Parts

We have been selling this fuel return kit since the Neon SRT-4 was released, so chances are you might have one that needs some fresh parts.  Here is our complete parts diagram breakdown and you...

SRT-4 Neon AGP Fuel Return Tube

Splice into your filler neck to return your fuel when you're building an external regulating fuel return kit. This is the same piece we include in the AGP Fuel Return Kit for the Neon SRT-4. -4 male...

SRT-4 Neon AGP Hardpipe Kit - UHP and LHP

It is time that you finally have the ability to upgrade your stock upper pressure intercooler hose to a piece that: 1. Fits and 2. Does not blow that damn temperature sensor out and leaves you with a...

SRT-4 Neon AGP Lower Hard Pipe (LHP)

You asked us for it, now we've made it. Introducing the Lower Hard Pipe for the SRT-4. This piece replaces the factory rubber hose that goes from the hot side charge pipe to the inlet of the...

SRT-4 Neon AGP Race Front Mount Intercooler Upgrade

The king of NSRT-4 intercoolers just got better.  The AGP race intercooler has now been updated with higher flowing cast end tanks.  These cast end tanks help direct air flow properly...

SRT-4 Neon AGP Screw In Temperature Sensor Kit

The factory (and all other aftermarket) Air Intake Temperature (IAT) sensor is held into the upper intercooler hose with a grommet. These sensors tend to blow out at higher than factory boost levels...

SRT-4 Neon AGP Screw In Temperature Sensor Kit Version 2

The factory (and all other aftermarket) Air Intake Temperature (IAT) sensor is held into the upper intercooler hose with a grommet. These sensors tend to blow out at higher than factory boost levels...

SRT-4 Neon AGP Solid Engine and Transmission Mounts

The factory engine mounts for the SRT-4 are inadequate for even a stock car. Upgrade to the AGP Solid Mount kit and eliminate your wheel hop. This kit is absolutely necessary for a modified SRT-4 as...

SRT-4 Neon AGP Solid Engine Mount and Trans Mount Bushing Large

This is for ONE (1) large bushing replacement for AGP's solid engine mount and trans mount.   You will need 6 of these for the engine mount and 2 of these for the trans mount.

SRT-4 Neon AGP Solid Engine Mount Bushing Kit

Have you broken a bolt, or lost one completely because it was not torqued properly? If so, then you probably tore the bushing and lost the washer. Here's our little rebuild kit for the AGP Solid...