Since SEMA 2014, we have all fallen in love with Borg Warner's factory-built SXE Billet (FMW) Wheel and 360 degree thrust bearing kits. Here at AGP, we've decided to offer up the perfect divided turbine housing specific to the 5.9 Cummins 12V and 24V (2nd Gen). We offer both a 14cm (.80 A/R) housing conjoined with all the different compressor and turbine configurations. We custom machine the outlet of the compressor cover to mate up with your factory boost elbow, and the turbine outlet flange is your industry standard HX40.
Here's the long list of all the available configurations, however the most popular ones are going to be the 62-68-14 and 63-68-14. But, some of you will run a ton of fuel and be able to light one of the larger 64.5 and 66-73 turbos, so go right ahead and slap that charger on.
Turbo will come complete with 3/8" Inverted Flare oil feed fitting, divided turbine inlet gasket, and oil drain gasket. You will need an HX40 style downpipe which is all over the internet for around $100 shipped. If you prefer to make your downpipe, we sell our flange and clamp kit here.