S400 Charge Pipe for 2nd Gen Swap Kits 2003-2009

Charge pipe made from 304 Stainless Steel with beaded end in 3".  This charge tube clamps directly to the S400 outlet and is sealed by included o ring.  Pipe is designed to be used with...

S400 Charge Pipe for 2nd Gen Swap Kits 2010-2012

Charge pipe made from 304 Stainless Steel with beaded end in 3".  This charge tube clamps directly to the S400 outlet and is sealed by included o ring.  Pipe is designed to be used with...

S400 Charge Pipe for 2nd Gen Swap Kits 2013-2018

Charge pipe made from 304 Stainless Steel with beaded end in 3".  This hot side (pre intercooler) setup uses a cast aluminum elbow that clamps directly to the S400 outlet and is sealed by...

S400 GT42 G42 G45 G47 G50 G55 G57 Compressor Discharge Elbow to 3" Tube

Adapt the compressor outlet of all S400, Z400, G42, GT42, GT45, G45, G50, G55, G57 turbos that have a 4.21" or 107mm v band discharge.  The kit sold here comes with o ring and Clampco brand...

S400 GT42 G42 G45 G47 G50 G55 G57 Compressor Discharge Elbow to 4" Tube

Adapt the compressor outlet of all S400, Z400, G42, GT42, GT45, G45, G50, G55, G57 turbos that have a 4.21" or 107mm v band discharge to a 4" Hose Outlet.  The kit sold here comes with o ring...

S400 Rebuild Kit with 360 Degree Thrust

Rebuild kit for S400 turbos, including all S400sx and S400 SXE turbo with both twin turbine end piston rings and single turbine end piston rings. Included: 2 journal bearings with retaining clips,...

S463 Compressor Wheel 168407

Replacement cast compressor wheel for Borg Warner S463 / S464 This wheel fits the following turbos: 167736 169012 Inducer: 63.5 Exducer: 91.4  

S464 83 Turbine Wheel T4 .90 A/R Housing HX40 Outlet 169012 Z463

AGP Brand S464, S463, S463.5, Z463. High Speed VSR Balanced, 360 Degree Thrust System Turbo has 83/74 turbine wheel directly interchangeable with Borg Warner S463 / S464 169012  70lbs / min...

S475 Compressor Wheel 171691

Replacement cast compressor wheel for Borg Warner S475 This wheel fits the following turbos: 171702 174259 174260 174269 176806 177101 177148 177288 179174 Inducer: 74.6 Exducer: 100...

Silicone Elbow .375" 90 Degree

4 Layer fiberglass reinforced silicone.  This is the highest quality silicone coupler you can buy. One 1.5" leg one 1" leg.  This is perfect for vacuum hoses. 3/8" ID

Silicone Elbow .50" 90 Degree

4 Layer fiberglass reinforced silicone.  This is the highest quality silicone coupler you can buy. One 1.5" leg one 1" leg.  This is perfect for vacuum hoses.

Silicone Elbow 2.50" 45 Degree

4 Layer fiberglass reinforced silicone.  This is the highest quality silicone coupler you can buy. 3.00" legs