Oil Drain Hose Fitting for T3 T4 S200 S300

This is the fitting that screws into the T3 T4 S200 S300 Drain Flange to allow you to adapt to 3/4" ID Hose for the oil drain. 1/2" NPT to 3/4" Hose

Oil Drain Line for 2nd Gen Swap Kit

Braided stainless -10 AN oil drain line.  This will fit S300 and S400 turbos running a 2nd Gen Style manifold in low mount setup.

Oil Feed Flange for T3/T4 2 Bolt Oil Inlet

If your turbo has the football shaped flange with two through bolts on either side of the oil feed port like the picture shows, this kit is for you.  Garrett, Turbonetics, and Precision use this...

Oil Feed Flange Kit for T3/T4 2 Bolt Oil Inlet

So you just bought this turbo from your "buddy" and you just can't figure out what the threads are.  You've gone to the auto parts stores, home improvement stores, and you just can't get the...

Oil Feed Line 28"

28" Oil Feed Line -4 female both ends

Oil Feed Line for S300 2nd Gen Swap Kit

Stainless braided -4 feed line for 2nd Gen Swap Kit for S300 turbos.  Includes fitting for the oil filter housing, and fitting for the turbo. Inlet fitting is 1/4" NPT found on S300.

Oil Feed Line for S400 2nd Gen Swap Kit

Stainless braided -6 feed line for 2nd Gen Swap Kit for S400 turbos.  Includes fitting for the oil filter housing, and fitting for the turbo. Inlet fitting is 1/4" NPT found on S400.

Precision 5862 6262 XX62 Replacement Turbine Wheel

Have you chunked up your valued Precision turbo and you want to get it back on the road quickly?  We offer the replacement XX62 turbine shaft and wheel.  Fix up your 5862 or 6262. 62mm x...

Precision 6266 6466 XX66 Replacement Turbine Wheel

Have you chunked up your valued Precision turbo and you want to get it back on the road quickly?  We offer the replacement XX66 turbine shaft and wheel.  Fix up your 6266 or 6466. ...

Precision 7X75 T4 Divided Inlet V-Band Outlet Turbine Housing

The Precision 7X75 series of turbos have been very popular for the past couple decades and we are offering a line of divided T4 housings to match the turbo.    

S300 Rebuild Kit with 360 Degree Thrust

Rebuild kit for S300 turbos, including all S360, S362, S363, S366 sx turbos, and all S300 SX-E turbos such as the S362, S363, S364.5, S366, S369, and S372 SXE Included: 2 journal bearings with...

S300 SX-E Compressor Housing with 90 Degree Elbow

Need a 90 Degree cover for your S300?  Here's one with the cast in elbow at 2.75" which is very popular on 3rd and 4th Generation Ram 5.9 and 6.7 Cummins.  Available in S362 up to S369