Oil Drain Flange S400 with O-Ring Seal

Billet 6061 oil drain flange for Borg Warner S400.  Center hole is tapped 3/4" NPT Updated with an O Ring seal so there is no need for a drain gasket  

Oil Drain Gasket EFR GT and GTX Ball Bearing Turbos

This oil drain gasket is used for GT25/GT28/GT30/GT35 ball bearing turbos as well as the GTX25, GTX28, GTX30, and GTX35 and all Borg Warner EFR. This can also be used for the oil feed gasket for...

OIl Drain Gasket S400

Oil Drain Gasket for S400 and GT42-45-47 framed turbos

Oil Drain Gasket T3 T4 S200 S300

Oil Drain gasket for T3 and T4 bearing housings as well as S200 and S300 turbos.

Oil Drain Gasket TD03 - TD06, K03, K04 Universal FIt

Oil drain gasket for TD03-TD06, along with K03-K04-K06 This gasket can be used as a universal gasket, please verify with the print that this will work on your turbo.  Trimming of gasket can be...

Oil Drain Hose Fitting for S400

This is the fitting that screws into the S400 Drain Flange to allow you to adapt to 3/4" ID Hose for the oil drain. 3/4NPT to 3/4" Hose

Oil Drain Hose Fitting for T3 T4 S200 S300

This is the fitting that screws into the T3 T4 S200 S300 Drain Flange to allow you to adapt to 3/4" ID Hose for the oil drain. 1/2" NPT to 3/4" Hose

Oil Drain Line for 2nd Gen Swap Kit

Braided stainless -10 AN oil drain line.  This will fit S300 and S400 turbos running a 2nd Gen Style manifold in low mount setup.

Oil Feed Flange for T3/T4 2 Bolt Oil Inlet

If your turbo has the football shaped flange with two through bolts on either side of the oil feed port like the picture shows, this kit is for you.  Garrett, Turbonetics, and Precision use this...

Oil Feed Flange Kit for T3/T4 2 Bolt Oil Inlet

So you just bought this turbo from your "buddy" and you just can't figure out what the threads are.  You've gone to the auto parts stores, home improvement stores, and you just can't get the...

Oil Feed Line 28"

28" Oil Feed Line -4 female both ends

Oil Feed Line for S300 2nd Gen Swap Kit

Stainless braided -4 feed line for 2nd Gen Swap Kit for S300 turbos.  Includes fitting for the oil filter housing, and fitting for the turbo. Inlet fitting is 1/4" NPT found on S300.