M14 Banjo Bolt

Banjo Bolt for Borg Warner EFR, GT Ball Bearing and T4 Ball Bearing turbos.  These will also fit a variety of MHI (Mitsubishi) TD05 bearing housings.  Please check your threads before...

M14 Copper Crush Washer

Copper crush washer for water line kits.  M14

M14 to -6 Water Fitting

M14 Thread for GT Ball Bearing and T4 Ball Bearing Turbocharger water jackets.  -6 AN Male Flare JIC

Midpipe for 2nd Gen Swap Kit

304 4.00" Stainless steel midpipe from our 2nd Gen Swap Kit.  This all stainless tig welded midpipe, joins the HX40 turbo outlet to the factory downipe location on 04.5-18, formerly taken up by...

Oil Drain Flange for EFR GT25 GT28 GT30 and GT35 w/ O-Ring Seal

Garrett GT25, GT28, GT30, and GT35 Ball Bearing Turbocharger Billet Aluminum Drain Flange with 1/2" NPT threads and o ring seal.  O Rind seal means no gasket to break up, fall apart, or leak...

Oil Drain Flange for T3 T4 S200 S300

Billet aluminum T3/T4 Oil drain flange tapped for 1/2" NPT fitting. NOTE: These will also fit the Borg Warner S200 and S300 series turbos.

Oil Drain Flange for T3 T4 S200 S300 w/ O-Ring Seal

Billet 6061aluminum Oil drain flange tapped for 1/2" NPT fitting with an o ring seal so there is no need for a gasket.  These fit all standard T3 and T4 oil drain from Garrett, Precision,...

Oil Drain Flange for T3 T4 S200 S300 w/ O-Ring Seal to -10AN

Billet 6061aluminum Oil drain flange to -10AN with an o ring seal so there is no need for a gasket.  These fit all standard T3 and T4 oil drain from Garrett, Precision, Turbonetics...

Oil Drain Flange GT / GTX / EFR w/ O-Ring Seal to -10 AN

Billet 6061 oil drain flange for Garrett GT, GTX, GTX Gen2 and Borg Warner EFR turbos with an O Ring seal so there is no need for a drain gasket. Male -10 AN  

Oil Drain Flange S400 / S300 / S200 w/ O-Ring Seal to -10 AN

Billet 6061 oil drain flange for Borg Warner S400 and S300 and S200 turbos with an O Ring seal so there is no need for a drain gasket. Male -10 AN  

Oil Drain Flange S400 / S300 / S200 w/ O-Ring Seal to -12 AN

Billet 6061 oil drain flange for Borg Warner S400 and S300 and S200 turbos with an O Ring seal so there is no need for a drain gasket. Male -12 AN  

Oil Drain Flange S400 / S300 w/ O-Ring Seal to .750 Hose Barb

Billet 6061 oil drain flange for Borg Warner S400 and S300 turbos with an O Ring seal so there is no need for a drain gasket. Male 3/4" .750 Hose Barb